The Canadian Sphagnum Peat Moss Association's Sept. 17 report, covering conditions through Aug. 31, gives growers a supply update rather than a shortage warning. Extraction reached 56% of expected levels in Alberta, 79% in Manitoba, 90% in Saskatchewan, 77% across Québec's North and South Shores, 70% in Southern New Brunswick, 85% in Northern New Brunswick, and 90% in Ontario. Prince Edward Island, Newfoundland and Labrador, and Nova Scotia were reported as significantly below expected levels.
The association attributes much of the shortfall to wet weather and says careful inventory management should allow producers to meet customer needs. That distinction matters: the report is not a declaration of a peat shortage.
What “Expected Extraction” Really Measures
CSPMA's “expected extraction” is not a measure of how much available peatland was harvested. It is the volume producers calculated they needed for the season: market requirements plus the desired year-end inventory buffer, minus inventory carried into 2026. The more useful question for growers, then, is not whether peat will run out, but how resilient a growing-media strategy is when a key material becomes harder or more expensive to secure.
The Risk Is Bigger Than Peat
Peat is one part of a broader supply picture. Climate affects harvest and biomass availability. Labor affects harvesting, processing and transportation. Freight can change the economics of a material long before its FOB price moves. Transportation is especially difficult now: The Wall Street Journal reported in late September that U.S. contract trucking rates averaged $3.11 per mile in August, including fuel surcharges, up 29% from a year earlier. Diesel, driver availability, rail surcharges and ocean freight all add volatility. For a bulky input such as growing media, delivered cost can shift a sourcing decision quickly.
Dr. Charlie Hall has made a similar point from the broader grower-cost perspective. In a recent Greenhouse Grower interview, he emphasized supply-chain agility, backup suppliers and working-capital discipline as growers plan for 2027. His Index of Prices Paid by Growers is useful because the cheapest input on paper is not necessarily the lowest-risk or lowest-cost choice once freight, inventory and operational impacts are included.
That is why raw-material selection should stop being treated as a once-a-year purchasing exercise. It is becoming a risk-management and production-design decision.
Start With Crop Character, Then Choose Ingredients
Growing media is often built in the opposite direction from the way it should be. The common approach starts with what is available — peat, coir, bark, wood fiber, perlite or another familiar component — and builds a mix around those ingredients. A better starting point is the crop itself. What does the root zone need? How much water holding and air porosity? What structural stability is required through the crop cycle? How must the material rewet, and what buffering and chemistry can the crop and irrigation program tolerate? How uniform does it need to be for automation? Once those requirements are clear, ingredients and percentages can be chosen to deliver that character.
This matters because the raw-material toolbox is expanding. Wageningen University & Research's 2026 work on the future of growing media identifies market-accepted materials such as coir, coniferous wood fiber, bark, compost and perlite, plus less familiar candidates including other plant fibers, biochars, co-composts and reused growing media. The researchers note that many new materials require processing, sanitization and stabilization before they can become reliable horticultural inputs. Availability is not the same as suitability — but suitability is increasingly something that can be engineered.
Revisit Materials Passed Over Five Years Ago
Processing technology has continued to improve across coir, wood fiber, bark and other biomass streams. Materials that were too inconsistent, too wet, too coarse, too salty, too difficult to handle or simply too expensive a few years ago may deserve another look. The same applies to regional agricultural residues that can be cleaned, screened, fiberized, composted or otherwise stabilized into more consistent horticultural ingredients. This is not a case for replacing a proven substrate because something new exists; it is a case for knowing what else is available before it is needed.
A material also does not have to become 30% or 40% of a formulation to be useful. In some systems, a 5% or 10% inclusion may be enough to change cost, water behavior, structure, rewetting or supply exposure. The right rate is a crop and system question rather than a universal prescription, and any new component needs to be trialed and validated before commercial adoption. Small trials become strategic here: an alternative wood fiber, rice hulls, bark fractions, coir products or locally available biomass, with attention to what changes in irrigation, fertility, handling and crop performance.
Local and Global Sourcing as a Portfolio
Interest in sourcing closer to home is understandable. Regional materials can reduce transportation exposure and add flexibility, especially when they can be processed near the point of use. But “local” is not automatically better, just as “imported” is not automatically risky. Coir, for example, travels a long distance yet can offer characteristics that are difficult to reproduce with some local materials. Peat remains an extraordinarily important and effective growing-media component, while wood fiber and bark can contribute well where feedstock and processing are right. A more resilient strategy is likely a portfolio: dependable core materials, strong supplier relationships, some regional options, some globally sourced options, and enough formulation knowledge to adjust without losing the root-zone character the crop requires.
Using 2026 as a Planning Signal
The lesson from this year's Canadian peat harvest is not that growers should move away from peat; CSPMA itself says inventory management should allow producers to meet customer requirements. The lesson is that the conditions behind raw materials can change quickly while crops still must be produced on schedule. Weather, labor, freight, tariffs and supply-chain disruptions over recent years have shown that yesterday's dependable supply pattern is not guaranteed to persist. Growing-media demand is also increasing: Wageningen research projects global demand rising substantially toward 2050, which implies a need for a broader basket of materials and more processing capacity rather than a different winner in the peat-versus-coir-versus-wood-fiber debate.
For growers planning 2027, the season raises practical questions: Which raw materials are most exposed in the current formulation? What is their true delivered cost? Which characteristics are essential to the crop? What other ingredients could deliver part of that function? And which of those should be trialed now? The best time to build flexibility into a growing-media program is while choices remain — before a shortage forces the decision.
