KraussMaffei Extrusion has introduced PVC InlineMixing, a single-stage extrusion process for PVC roofing membranes that the company says can replace the conventional two-stage route built around a separate heating-cooling-mixing combination. The Laatzen-based machinery maker announced the development on November 17, 2026, citing lower energy costs, shorter production times and a faster return on investment among the intended benefits.
From batch dryblend to continuous dosing
In the established process, PVC powder, plasticizers, additives and fillers are processed batchwise in a hot-cold mixer combination to produce a dryblend. The mix is then cooled, held in intermediate storage and only afterwards plasticized in a twin-screw extruder and formed into membrane. PVC InlineMixing removes the separate mixing step: all solid and liquid components are fed directly into the extruder through gravimetric dosing systems in the proportions the formulation calls for.
Energy, space and labour effects
According to KraussMaffei, the continuous route brings several cost advantages. There is no need to invest in a separate heating-cooling-mixing combination, and the material has to be heated only once. Depending on the formulation, the system parameters and the plant location, the company puts the reduction in energy consumption, and therefore energy costs, at up to 75 percent. Dropping the separate mixing stage also reduces the floor space required for the complete line and lowers labour requirements, while maintenance costs fall because wear parts for the heating-cooling mixer are no longer needed. The combination of lower capital expenditure and lower operating costs is presented as the basis for a quick return on investment.
Formulation changes during operation
KraussMaffei also highlights production flexibility. Formula adjustments and colour changes can be carried out directly during operation through the integrated control system, so separate dryblend batches no longer have to be prepared and stored in advance. "For manufacturers of PVC roofing membranes, this represents a clear competitive advantage: lower production costs, greater flexibility and more efficient manufacturing," said Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion, adding that producers can respond more quickly to new requirements and adjust formulations during the production process.
Validation on a ZE 65 BluePower extruder
The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and validated with industrial roofing membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing ingredients. The ZE BluePower series has a Da/Di ratio of 1.65; the combination of high torque and large free volume is intended to provide a wide process window for different formulations. KraussMaffei reports that the tests confirmed good gelation of the PVC and high product quality, with the mechanical properties and weldability of the membranes meeting industrial requirements across several formulations. Bartel said customers can test their own formulations under production-relevant conditions at the Technology Center and use the results as a basis for industrial implementation.
Already running in production
PVC InlineMixing is already in use on an industrial production line for PVC roofing membranes. The reference plant reaches a total throughput of 1,800 kg/h with two extruders and two calenders, processing PVC, additives and fillers together with the resulting edge trimmings continuously into finished membrane. KraussMaffei positions the process as a way to combine high product quality with a leaner production route.
